Latch Type Toggle Clamps
![](../images/lu-1_small.jpg)
LU-1
This is our lightest duty latch clamp useful in many mold and similar latching applications.
Hold Rating: 375 lbs.
![](../images/lu-2_small.jpg)
LU-2
This is our most popular latch clamp. It mounts with two 1/4" bolts through the holes provided or may be welded in place. This clamp may be mounted over a slot to allow adjustment.
Hold Rating: 800 lbs.
![](../images/lu-2s_small.jpg)
LU-2S
This is our smallest latch clamp and it comes complete with the catch shown. Both the clamp and catch mount with 1/4" bolts. Its compact size allows it to fit into tight places.
Hold Rating: 800 lbs.
![](../images/lu-2w_small.jpg)
LU-2W
This is our most popular latch clamp. It mounts with two 1/4" bolts through the holes provided or may be welded in place. The LU-2W has a welded cross bar with a threaded hole that allows mounting a bolt for adjustment of the clamping pressure.
Hold Rating: 800 lbs.
![](../images/lu-4_small.jpg)
LU-4
This clamp has the same design as the LU-2. Heavier gauge and thicker bars and handles make it a medium duty latch clamp.
Hold Rating: 1400 lbs.
![](/images/nophoto.gif)
LU-4W
This clamp has the same design as the LU-2. Heavier gauge and thicker bars and handles make it a medium duty latch clamp. The LU-4W has a welded cross bar with a threaded hole that allows mounting a bolt for adjustment of the clamping pressure.
Hold Rating: 1400 lbs.
![](../images/lu-8_small.jpg)
LU-8
The largest and heaviest of our latch clamps. This clamp uses heavier gauge steel than the LU-4.
Hold Rating: 2000 lbs.
![](/images/nophoto.gif)
LU-8W
The largest and heaviest of our latch clamps. This clamp uses heavier gauge steel than the LU-4. The LU-8W has a welded cross bar with a threaded hole that allows mounting a bolt for adjustment of the clamping pressure.
Hold Rating: 2000 lbs.
![](../images/3630_small.jpg)
3630
This is a latch type clamp that reaches around an edge to latch. The clamp mounts with two 1/4" bolts.
Hold Rating: 400 lbs.